タイトルまたは説明

JHPK-IIIB ,High-pressure Polyurethane Spray and Perfusion Equipment.The parts of the equipment are from America making sure the pressure is enough for mixing the double component materials together.It has the separate heater which is ***0 watt;provides the reliable heat source for the row materials.The pipe of heating and preserved is *5 meters and it preserves the heat energy of the materials.The system of spray gun with non-solvents washing makes the machine easy to operate,and maintain.

Standard Configuration:
Mainframe: 1 set Spray gun: 1 set
Heating and preserved pipe: *5m
Connecting pipe for spray gun: 1.5m Max.
Pipe length:*5m
Transfer pump: 2 sets
Technical Parameter:
Ratio of raw material :1:1(fixed ratio)
Viscosity range of raw material :**0~***0CPS(under working temperature)
Electrical source: single phase **0v ***0w
Air source:0.5~0.8Mpa(*0~**0psi) ≥ 0.9m3/min
Output: 4~8kgsmin
Heating device power for material: ***0w ×2
Heating power for pipe heating: ***0w
Single component output pressure: 5~*0Mpa (**0~***0psi)
Technical Parameter:
Weight: **0kgs
Volume: **0x**0x***0(mm)